 |
| Quantity: | |
|---|---|
LHSS-II
1. Measuring cylinder: is made of plexiglass and installed on the upper part of the instrument. The dissolution volume is about 600ml. The scale is marked on the top and the resolution is
2ml, with thick marks at 100ml and 500ml.
2.Connector: to connect cylinder to the base, with stainless steel valve in the middle for the start and stop of the experiment.
3. Base: the inner diameter of the opening below the base is∮150mm, and the outer diameter is ∮220mm.
4. Bracket: consists of uprights and top plate.
5. Weight blocks:there are four weight blocks, each of which is about 2.5kg.
6. Standard ring for water seepage area (hereinafter referred to as standard ring): 1piece, the diameter of the bottom surface is∮150mm.
7. Accessories: Marking ring.
1. Measuring cylinder: is made of plexiglass and installed on the upper part of the instrument. The dissolution volume is about 600ml. The scale is marked on the top and the resolution is
2ml, with thick marks at 100ml and 500ml.
2.Connector: to connect cylinder to the base, with stainless steel valve in the middle for the start and stop of the experiment.
3. Base: the inner diameter of the opening below the base is∮150mm, and the outer diameter is ∮220mm.
4. Bracket: consists of uprights and top plate.
5. Weight blocks:there are four weight blocks, each of which is about 2.5kg.
6. Standard ring for water seepage area (hereinafter referred to as standard ring): 1piece, the diameter of the bottom surface is∮150mm.
7. Accessories: Marking ring.
